Home > Unable To > Unable To Access The Virtual Machine Configuration Unable To Access File

Unable To Access The Virtual Machine Configuration Unable To Access File


Already have an account? Now that the file is renamed we are not there yet. What to I do, when I don't know which server that's holds on to the template file? Saved me a lot of headaches Reply Rick DeCaro said August 5, 2013 at 21:35 Anton, Thanks for the info! Source

So i set DRS to manual and vmotioned all the guests to other hosts except the VCenter and VDR machine (which were on this host). This can be obtained by navigating to the URL for the VMware vSphere server without the port defined. In my scenario I cloned from Template in a ESX 4.1 Env. For SSH-access that service must be enabled. https://communities.vmware.com/thread/435023?start=0&tstart=0

Unable To Access The Virtual Machine Configuration Unable To Access File

This was the best post on the bug. Be very careful here, selecting just remove, and DO NOT dele files from disk.Also, confirm that you selected the right hard disks ! If you do, search the inventory for this template using the search box in the top-right corner of vSphere Client. In the newer versions this note was removed, but it seems to be the UI change only 🙁 I hope VMware will take care about this bug some day… Regards, Anton.

My recipe is a bit more dirty, but allows you to preserve your changes in the VM and fully recover the template - even without the backups. if im delete the Extra vDisk at VDR, i there restart needed or not at the VDR Appliance or the VMs that the vDisk Locked. thanks a lot man… safe my trouble 🙂 Reply Anton Khitrenovich said August 29, 2012 at 12:49 Enjoy 🙂 Reply google.com/accounts/o8… said September 6, 2012 at 10:22 Hi! Thanks!

I dont actually see any -flat or -original files. 2. Unable To Access File Ds ///vmfs/volumes In the image below you see the files listing of a template, created with the ls -l command. If that is the case first try to find the template on the right datastore. https://groups.google.com/d/topic/pysphere/xIEJu5Ty6eE ANNULER Supporto Citrix Traduzione automatica Questo articolo è stato tradotto da un sistema di traduzione automatica e non è stata valutata da persone.

the cloned VM took the Template vmdk (because I may have experimentally changed some settings) All i did was power off the offending VM, gave it its original disk back and You could either browser to the .vmx file from the vSphere Web Client to add it to the inventory or do in from the command line now that you are there anyway. Then, go to the Summary tab. I didn't even think to look there until I found your post.

Unable To Access File Ds ///vmfs/volumes

Well, how do you recover from this situation? https://support.citrix.com/article/CTX202551 Your lovely template is now gone, since the disk that belonged to the template is now owned by the running virtual machine - with new name, settings and maybe even software! Unable To Access The Virtual Machine Configuration Unable To Access File Reply Anton Khitrenovich said September 25, 2012 at 17:09 Yep, it will work in case you don't care about the work already done on that VM… Reply theglenndavid.wordpress.com/ said November 21, Unable To Access The Virtual Machine Configuration Invalid Datastore Path last time this happened to me, we just ghosted the vm because we couldnt figure out what had it locked, after scouring blogs and vmware we were looking for locked files

If you compare the anatomy of a virtual machine to that of a template in the file system you will find that the only difference is that a virtual machine has this contact form Thanks for taking the time to document this issue. :)--NicoleReplyDeleteFrederic21 May 2010 at 07:05Yeahhhhhhhhhh!!! Citrix a recours à la traduction automatique afin d'améliorer l'accès au contenu de ses pages de support ; cependant, les articles traduits automatiquement peuvent contenir des erreurs. Good luck, Anton.

Thanks & RegardsReplyDeleteBrian15 June 2011 at 08:43Urok!ReplyDeleteTota13 July 2011 at 02:27We're using PHD for backups. i got into this problem and searched for a solution in google and first got into this blog and it worked like a miracle.I am very pleased. One extra thing I did was to extend the volume via Windows Disk Management. http://globalcryptonews.com/unable-to/relocate-virtual-machine-unable-to-access-file.html Reply Anton Khitrenovich said November 30, 2012 at 19:46 I'm glad you loved it.

Fixed it by editing the vmdk file and set the "Extent Description" to the right amount of extents Reply Adriane said February 19, 2015 at 07:22 Hi to All,espcially to Anton Reply Anton Khitrenovich said November 21, 2012 at 22:40 David, I'm glad my post is helpful. Which best describes you: IT Admin Business User DOWNLOAD Applicable Products Provisioning Services Symptoms or Error Failed to create new virtual machine using XenDesktop setup wizard.

Environment Linux; Data Server; Gateway Server Diagnosing the problem Observe for proper deployment of the OVA template and no generation of any error messages Resolving the problem The appropriate method for

Thank youReplyDeleteHarryjames18 January 2013 at 22:15restrhttp://www.veeam.com/kb1213ReplyDeleteMohammed Ali2 April 2013 at 21:47u r a star .... 100% works for me ReplyDeletebunk3 April 2013 at 11:21Good stuff. Depending on the type of error this might work. Re: Unable to convert a template residing in one esx host's local data store into a VM in another ESX host vMario156 Feb 8, 2013 5:31 AM (in response to becky_j) Thank you so very much ;-)ReplyDeleteJean-Philippe Seguin14 August 2010 at 12:35Thanks, good issue and great paper !ReplyDeleteSrinivas Kolla16 August 2010 at 21:52ED,This is really a nice stuff.

regards, adriane Reply Leave a Comment Cancel reply Your email address will not be published. Hey, this is a template! You can follow any responses to this entry through the RSS 2.0 feed. http://globalcryptonews.com/unable-to/unable-to-change-virtual-machine-power-state-the-file-specified-is-not-a-virtual-disk.html Specified –resource-pool.

The new VM (say, "MyVM") will be created successfully, but the next time you'll go through the deployment process it will fail with a strange message: "Unable to access file ‘MyTemplate/MyTemplate.vmdk' you saved the day ReplyDeleteAdd commentLoad more... When the virtual machine is updated you then convert it back to a template. CANCELAR 시트릭스 지원 자동 번역 이 문서 자동 번역 시스템에 의해 번역 된 사람들에 의해 검토되지 않았다. 시트릭스는 컨텐츠를 지원하기 위해 접근을 높이기 위해 자동 번역을 제공합니다; 그러나, 자동으로 번역 기사

it really saved my day. But doing this every time a backup my fail and the VM needs consolidation isn't practical. Citrix fornisce traduzione automatica per aumentare l'accesso per supportare contenuti; tuttavia, articoli automaticamente tradotte possono possono contenere degli errori. Newer Post Older Post Home Subscribe to: Post Comments (Atom) Blog Archive ► 2016 (1) ► October (1) ► 2015 (10) ► August (6) ► May (1) ► April (3) ►

Ended a LOT of frustration this morning. The following error message is displayed:"Unable to access the virtual machine configuration: Unable to access file [Test_LUN] __Test01/__Test01.vmtx" Solution Mount shared storage for this host or remove this host from the thank you very much! We have removed the template from the inventory and this virtual machine now will not automatically show up in the inventory.

Presuming that your source VM is named "CHEFUBUNTU1204", can you perform a state command on it to ensure the API can find your VM to begin with? Still says the file is locked. But it still had the file in use after shutting down the VMware Data Recovery machine. Was able to fix this problem by doing the following: Made sure the folder containing the templates was available to every host under the vCenter server.

Renaming a file is actually done by moving it from the original location (file) to the new location (same file, new name) with the mv command. After the reboot. If it is my fault, do you have any idea how I might avoid this configuration problem in the future? This guide is ace :0)ReplyDeletekevin24 May 2011 at 21:02hey..