Home > Unable To > Unable To Access Cpuid Driver

Unable To Access Cpuid Driver

CpuID: 410CC200. If so, then I won't be able to test the new code until the weekend. But if you ensure that JP1 is open before connecting your LPC-Link2 to your PC, then you may then be able to use LPCScrypt to erase whatever you have programmed into Instruction TLB: 4KB pages, 4-way associative, 32 entries Instruction TLB: 4MB pages, fully associative, 2 entries Data TLB: 4KB pages, 4-way associative, 64 entries Data TLB: 4MB pages, 4-way associative, 8 Source

What I can do? Vector catch: Enabled. Used Uniprocessor CPU routines. I was able to unlock one board.

I thought this was fixed early on (Circa -U1) in RHEL4. This error seems to be also related to an issue during the verification of the Flash. The 3 other boards are still locked.

Furthermore the example supplied by 'Rodri' was configured to use a different driver. This error has occurred on multiple boards (4 boards: 3 custom boards and 1 LPC-Link2 board), with different IDE version (v7.9, v8.0, v8.1), with different program (e.g. You have debug access to the target. The LPC-Link2 seemed to work with my target only if JP2 was installed even though my target was supplying power to what I thought was the VTref pin.

Instead of connecting my target power to J6 pin 1, I had to remove JP2 and connect the target power to pin 1 of JP2. Regards, LPCXpresso Support --- ** Latest version of LPCXpresso IDE : v8.1.4 ** http://www.lpcware.com/content/forum/lpcxpresso-latest-release Visit the LPCXpresso FAQs at http://www.lpcware.com/faq/lpcxpresso --- ** Latest version of LPCXpresso IDE : v8.1.4 ** http://www.lpcware.com/content/forum/lpcxpresso-latest-release Programming LPC-Link2 with "LPC432x_CMSIS_DAP_V5_147.bin.hdr" Probe LPC-Link2 programming failed: Error: :1: Verify Error 0xb 0x14000000 Script cmd: program C:\nxp\LPCScrypt\probe_firmware\LPCLink2\LPC432x_CMS IS_DAP_V5_147.bin.hdr SPIFI Last target cmd: =programPage 14000000 6b Terminated with errors Usage: Connect http://ematahic.marathoncloud.com/detected-smp-but-unable-to-access-cpuid-driver.asp LPCScrypt is built on the LPCOpen SPIFI library (as are the flash drivers supplied with LPCXpresso IDE).

when I try to erase: Quote: c:\nxp\LPCScrypt\bin>lpcscrypt erase SPIFI Erasing SPIFI ... In order to answer some of the question asked by LPCXpresso Support, I would like to precise that my application code did not interact with the SPIFI flash. DpID: 4BA00477. Generated Thu, 22 Dec 2016 12:37:09 GMT by s_wx1195 (squid/3.5.20) Home Products Archive Affiliates About Contact Categories Wallpapers Music Graphics Network Internet Search Recent Updates tabula rasa 1 15 patch

Has your application code by any chance locked any of the sectors in the external SPIFI flash?? http://puqonezel.billhosting.com/unable-to-access-cpuid-driver.htm Please helpme, my intention is not to buy 500 link2 more in order to perform 1 or 2 tests. FYI, the 3 locked boards are the one that I have locked during the same afternoon last week (So I share the same frustration than rodri). Here is the complete list of the LPCScrypt command that I have used: C:\nxp\LPCScrypt>scripts\boot_lpcscrypt.cmd Booting LPCScrypt target with "LPCScrypt_83.bin.hdr" LPCScrypt target booted C:\nxp\LPCScrypt>bin\lpcscrypt.exe erase SPIFI Erasing SPIFI ...

iphone apps created by. this contact form Vector catch: Disabled. But I can't write to memory or debug my program. If you are a visitor of this website: Please try again in a few minutes.

Info: (null) Nc: Debug protocol: SWD. Here is procedure that I use to program the Flash: Click on "Program Flash" button (Program Flash using LPC-Link2 CMSIS-DAP V5.147) use JTAG interface => unchecked Reset target on completion => line size=32 bytes. have a peek here From the datasheet of the SPI flash part on this device we can speculate that write protection has been erroneously set, but it remains unclear why this has occurred. 2 -

I think this is very unlikely - this driver is a variant of our previous drivers only differing in that it reads device information when invoked and dynamically configures. Nc: loaded v.2 On-chip Flash Memory LPC11_12_13_32K_4K.cfx Nc: image 'LPC11_12_13 (32K Flash, min 4K RAM) Mar 17 2015 09:28:32' Pc: ( 65) Chip Setup Complete Nt: Connected: was_reset=false. Nc: inspected v.2 External Flash Device on SPI C:\nxp\LPCXpresso_8.1.0_597\lpcxpresso\bin\Flash\LPC18_43_SPIFI_GENERIC.cfx Nc: image 'LPC18/43 Generic SPIFI Feb 16 2016 09:19:36' Nc: flash variant 'S25FL016K' detected (2MB = 32*64K at 0x14000000) Nc: NXP: LPC4370

I found an application note (AN10851) about the Code Read Protection, but it uses Flash Magic which unfortunately doesn't support the LPC4370.

o Certificate from the Office on Muslim Affairs for Muslim convert o Fro Muslim converts, submit annotated BC in Security Paper (SECPA) o Court Order unable to access cpuid driver change DpID: 0BB11477. After upgrading to 7.7.2, I cannot program the flash nor load/debug a program. L1 Data cache: Size: 16KB 4-way associative.

Format For Printing -XML -Clone This Bug -Top of page First Last Prev Next This bug is not in your last search results. TX errors with c_can.. L2 unified cache: Size: 512KB 8-way associative. Check This Out Found 2 CPUs -------------------------------------------------------------------------- CPU #1 /dev/cpu/0/cpuid: No such file or directory Family: 6 Model: 11 Stepping: 4 Type: 0 Brand: 4 CPU Model: Pentium III [B-1] Original OEM Feature flags:

Safety Library/Class B Library for LPC1343 Micro-controller? I observe exactly the same behavior than rodri during the SPIFI erase on the locked boards. http://www.lpcware.com/content/faq/lpcxpresso/regaining-debug-access http://www.lpcware.com/content/faq/lpcxpresso/launch-configuration-menu Please post debug logs from using LPCXpresso 7.7.2, both with vector catch enabled and without - ensuring that you first switch on the "DEBUG TRACE" option as follows: * Link2 can work as a debuger, but can't be programmed, not seems broken.

Basically I was testing HSADC, timers, wdt (init function commented for tests), and other modules. was_stopped=true LPCXpresso Free License - Download limit is 256K FlashStart FLASH algorithm download complete (at 0x10000000 888 bytes) BEFORE execution Driver Register State R0: 10000C38 R1: 00000000 R2: 00000000 R3: 00000000 line size=32 bytes. Yours, LPCXpresso-support --- ** Latest version of LPCXpresso IDE : v8.1.4 ** http://www.lpcware.com/content/forum/lpcxpresso-latest-release Visit the LPCXpresso FAQs at http://www.lpcware.com/faq/lpcxpresso --- ** Latest version of LPCXpresso IDE : v8.1.4 ** http://www.lpcware.com/content/forum/lpcxpresso-latest-release Visit

Thank you for your prompt aid in trying to troubleshoot this problem. http://rhn.redhat.com/errata/RHBA-2006-0382.html Note You need to log in before you can comment on or make changes to this bug. CpuID: 410CC200. was_stopped=true v LPCXpresso Free License - Download limit is 256K Writing 17564 bytes to address 0x00000000 in Flash Erased/Wrote page 0-4 with 17564 bytes in 4105msec Flash Write Done Flash Program

Info: Debug protocol: JTAG. Instruction TLB: 4KB pages, 4-way associative, 32 entries Instruction TLB: 4MB pages, fully associative, 2 entries Data TLB: 4KB pages, 4-way associative, 64 entries Data TLB: 4MB pages, 4-way associative, 8 CpuID: 410CC200. line size=32 bytes.

was_stopped=true LPCXpresso Free License - Download limit is 256K FlashStart FLASH driver initialization failed - rc Em(12). I have my 2 link2 bricked at this moment!